During “Never stop learning, because knowledge is the only

During my schooling, I remember my
teacher telling me “Never stop learning, because knowledge is the only thing
which stays with you always”.
This line stuck in my mind and so I am always eager to learn.

Ever since my childhood, I have had an
affinity towards science and technology. As a part of school science committee,
I always had a chance to be a part of Science Exhibitions, Site visits etc. Computers
always fascinated everyone but what fascinated me more is the electronics
inside the computers, I always wanted to learn how those circuit boards worked.
After completing 10 years of exciting schooling I was able to score 88.96% in
my X Standard. 

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!


order now

Since I was more into Electronics I was able
to choose Electronics instead of Biology or Computer science during my Intermediate
studies. That’s where I learnt little more about electronics and also
discovered something more exciting known as electricals. I was able to put in seven
hours of grueling study every day for two years with the aim of performing well
in the competitive exams. This assiduous labor bore fruit after I scored 93% in
my major – Electronics and 86% in overall giving me the opportunity to secure a
merit seat in Sir M. Visvesvaraya Institute of Technology, Bengaluru affiliated
to Visvesvaraya Technological University for my undergraduate studies and yes,
I took Electrical and Electronics Engineering as my undergraduate course
because it covered all the electronics as well as electrical courses. I was introduced
to various electrical and electronics courses such as Analog Electronics,
Digital signal processing, Field Theory, Control Systems, DC Machines,
Microcontrollers, Network Analysis Etc.

My major project was during my final year of
engineering, we were a team of four and our project was “New Improved
Interleaved Buck Converter with Low Switching Losses”. It’s a stepdown
voltage converter with low switching losses and high stepdown conversion rate making
it advantageous over a Conventional Buck Convertor. The project was completed both
by software simulation and hardware representation. Using Arduino Uno, Opto
Couplers, Transformers, Filters, Voltage Circuits Etc. for our project was very
stimulating and was also appreciated by many senior professors.

Being a team member of college cultural
committee, I was involved in many co-curricular activities such as Drama, Skit,
Street Play that helped me hone my team building skills and contributed towards
solidifying my leadership abilities. I also lead the organizing team of
“ISIRI”, The cultural fest of my college which encouraged all the students from
different states to participate and learn more about Culture of my state.
Photography is also one of my biggest hobbies, Inter-College fests and
functions gave me opportunities to show my photography skills.

My final year project made me more inquisitive
about microcontrollers, So I joined an Electronics Corporation of India LTD
certified “Embedded System Design “course as soon as I completed my undergrad.
During my training I learnt deeply about Assembly language and Micro
controllers like 8051, Arduino Uno, Cortex ARM M0/M3. With the use of protocols
and peripherals such as UART, I2C, MAX232, ADC, LCD/LED, RTC, EEPROM, Timers,
DC Motor, IR Sensor, RFID, Ultrasonic Sensor, Bluetooth Module I was able to do
number of small projects writing my own embedded C codes.

Later I started working in Tata Consultancy
Services where I was put into an intense training in Infrastructure Services
with emphasis on Networking. The course covered topics like – Networking
models, Networking protocols, Networking Algorithms, Networking Devices,
Networking Media, Networking Topology, Concept of different Servers, Concept of
Networking Security, Implementation of a simple LAN and WAN, VOIP, CUCM, connecting
a particular office or site to Internet, Securing a particular site from
outside, Wireless Network and its Security, Simple Network Troubleshooting,
Network Addresses. After training I got a Retail project as a Network
Administrator where I got to troubleshoot live networks and VoIP devices, in
past two years of working as an Network Administrator I gained more knowledge
about networking and also network VOIP which indeed increased my
troubleshooting skills and learnt how to respond to different scenarios.

Now I stand in a place where I’m confidentDuring my schooling, I remember my
teacher telling me “Never stop learning, because knowledge is the only thing
which stays with you always”.
This line stuck in my mind and so I am always eager to learn.

Ever since my childhood, I have had an
affinity towards science and technology. As a part of school science committee,
I always had a chance to be a part of Science Exhibitions, Site visits etc. Computers
always fascinated everyone but what fascinated me more is the electronics
inside the computers, I always wanted to learn how those circuit boards worked.
After completing 10 years of exciting schooling I was able to score 88.96% in
my X Standard. 

Since I was more into Electronics I was able
to choose Electronics instead of Biology or Computer science during my Intermediate
studies. That’s where I learnt little more about electronics and also
discovered something more exciting known as electricals. I was able to put in seven
hours of grueling study every day for two years with the aim of performing well
in the competitive exams. This assiduous labor bore fruit after I scored 93% in
my major – Electronics and 86% in overall giving me the opportunity to secure a
merit seat in Sir M. Visvesvaraya Institute of Technology, Bengaluru affiliated
to Visvesvaraya Technological University for my undergraduate studies and yes,
I took Electrical and Electronics Engineering as my undergraduate course
because it covered all the electronics as well as electrical courses. I was introduced
to various electrical and electronics courses such as Analog Electronics,
Digital signal processing, Field Theory, Control Systems, DC Machines,
Microcontrollers, Network Analysis Etc.

My major project was during my final year of
engineering, we were a team of four and our project was “New Improved
Interleaved Buck Converter with Low Switching Losses”. It’s a stepdown
voltage converter with low switching losses and high stepdown conversion rate making
it advantageous over a Conventional Buck Convertor. The project was completed both
by software simulation and hardware representation. Using Arduino Uno, Opto
Couplers, Transformers, Filters, Voltage Circuits Etc. for our project was very
stimulating and was also appreciated by many senior professors.

Being a team member of college cultural
committee, I was involved in many co-curricular activities such as Drama, Skit,
Street Play that helped me hone my team building skills and contributed towards
solidifying my leadership abilities. I also lead the organizing team of
“ISIRI”, The cultural fest of my college which encouraged all the students from
different states to participate and learn more about Culture of my state.
Photography is also one of my biggest hobbies, Inter-College fests and
functions gave me opportunities to show my photography skills.

My final year project made me more inquisitive
about microcontrollers, So I joined an Electronics Corporation of India LTD
certified “Embedded System Design “course as soon as I completed my undergrad.
During my training I learnt deeply about Assembly language and Micro
controllers like 8051, Arduino Uno, Cortex ARM M0/M3. With the use of protocols
and peripherals such as UART, I2C, MAX232, ADC, LCD/LED, RTC, EEPROM, Timers,
DC Motor, IR Sensor, RFID, Ultrasonic Sensor, Bluetooth Module I was able to do
number of small projects writing my own embedded C codes.

Later I started working in Tata Consultancy
Services where I was put into an intense training in Infrastructure Services
with emphasis on Networking. The course covered topics like – Networking
models, Networking protocols, Networking Algorithms, Networking Devices,
Networking Media, Networking Topology, Concept of different Servers, Concept of
Networking Security, Implementation of a simple LAN and WAN, VOIP, CUCM, connecting
a particular office or site to Internet, Securing a particular site from
outside, Wireless Network and its Security, Simple Network Troubleshooting,
Network Addresses. After training I got a Retail project as a Network
Administrator where I got to troubleshoot live networks and VoIP devices, in
past two years of working as an Network Administrator I gained more knowledge
about networking and also network VOIP which indeed increased my
troubleshooting skills and learnt how to respond to different scenarios.

Now I stand in a place where I’m confident on
my fundamentals and my keen interest in the stream, coupled with the fine educational
background that I have gained, give me the zeal to take up higher studies at
your prestigious University. This further schooling will prove instrumental in
helping me meet my career objectives. The courses offered in the university
such as Digital Integrated circuits, Signal processing, Image Processing,
Wireless networks, Networking etc. excited me, experienced and talented
faculties in the department has motivated me more to get an admission in
University of ———–.
A masters from the Electrical and Computer engineering department
would be the best thing that could happen to me as I seek to achieve my goals.
I request you to consider my application and help me fulfill them. Overall, I
feel this program would enable me to have a strong understanding of all the
core aspects of Electrical and Computer engineering, and also let me take up
projects in my fields of interest. on
my fundamentals and my keen interest in the stream, coupled with the fine educational
background that I have gained, give me the zeal to take up higher studies at
your prestigious University. This further schooling will prove instrumental in
helping me meet my career objectives. The courses offered in the university
such as Digital Integrated circuits, Signal processing, Image Processing,
Wireless networks, Networking etc. excited me, experienced and talented
faculties in the department has motivated me more to get an admission in
University of ———–.
A masters from the Electrical and Computer engineering department
would be the best thing that could happen to me as I seek to achieve my goals.
I request you to consider my application and help me fulfill them. Overall, I
feel this program would enable me to have a strong understanding of all the
core aspects of Electrical and Computer engineering, and also let me take up
projects in my fields of interest.